Hex - Nylon Cap Lock Nut
Locking Insert: Nylon (250°F Max. Performance). Purple, White, Black or Gray.
(The Locking Insert and Cap Are an Integral Part)
Applications: Type NKM, NKE, NKTM and NKTE Cap Nuts are designed for use in place of Standard and Thin Height hex nuts in applications where for reasons of safety or appearance, it is desirable to cover exposed bolt ends. They are also suitable for sealing internal or external pressures, up to 80 psi past the bolt threads, provided a proper seal is effected between the nut seat and its mating surface.
Unit of Measure
Specifications
Post Plating Finish |
N/A F - Yellow Chromate T - Trivalent TF - Trivalent Zinc/Yellow |
Material |
N/A 2 - Low Carbon Steel 7 - Stainless Steel 18-8 |
| Plating1 | N/A 1 - Zinc 2 - Cadmium 3 - Phosphate & Oil 4 - Black Zinc 5 - Black Oxide 8 - Anodized 9 - Plain |
Thread |
N/A 8-32UNC-3B |
Height - A |
N/A .308 in |
Across Flats - B |
N/A .346-.334 in |
(Ref) Across Corners - C |
N/A .378 in |
(Ref) Cap - D |
N/A .225 in |
| Min. Bolt End - H12 | N/A .191 in |
| Max. Bolt End - H23 | N/A .250 in |
(Ref) Wrench Pad - L |
N/A .110 in |
Weight Lbs./C (Steel) |
N/A .31 |
- 1 9 - Plain cannot be used with a Post Plating Finish
- 2 H1 minimum designates the minimum recommended bolt entry to insure satisfactory locking performance
- 3 H2 maximum designates the maximum recommended bolt entry to avoid contact with the top of the cap
